Plug in the HRC 400 controller #
Once the controller is plugged into the power source, it will automatically look to pair with your smart device. In the top left corner of the controller screen, the “Bluetooth” icon will flash with a graduated blinking sequence. This indicates that the controller is ready to pair with a smart device.
Connect to your HRC 400 controller #
Open your B-hyve Pro app, create an account or log in, and follow the step-by-step instructions in the app to pair and set up your device. When the app prompts you to connect to a Wi-Fi network, select the network from the list and enter the password. When connected, the Wi-Fi icon on the controller will stop blinking and show solid lines, indicating the signal strength.
Note: If you do not see your network name in the list, tap the refresh button in the app. If your network name still does not appear, tap “Advanced” in the app and enter your network name and password. This device will only connect through 2.4 GHz Wi-Fi networks. 5.0 GHz networks are not supported and will not appear in your app.
Tip: You can re-pair your smart device with your controller by turning the dial to “Off” and pressing the reset button on the back of the swing panel. The controller display will show “Pair.”
Note: Press the Reset tab on the back of the swing panel to clear any previous factory programming.