Pump Faults

A pump fault message appearing on your controller or B-hyve app typically means that your controller is detecting a short in the wire connected to the PUMP terminal.

An easy test to do is removing the wire from the PUMP terminals in your controller. Then attempt to run a station or program manually.

  • If the fault message does not appear, there’s an issue with the pump, pump wiring, or pump start relay
  • If the fault message appears, then the controller should be replaced.

Powered by BetterDocs


            

            

                        
            
            
assignment_turned_in Registrations

    
     
   
Password must be at least 7 characters long.
Password must be at least 7 characters long.
This is used in forums and emails (including marketing emails IF you signed up for them)
Please login to view this page.
Please login to view this page.
Please login to view this page.
No item in the cart
Go shopping!