Table of Contents
The BHP-RAVC has a built-in access point. After installation this access point can be safety disabled.
Disable the Access Point #
Press and hold the top button until you hear 3 beeps, each beep will be about 3 seconds apart. The valve controller will quickly beep and the Wi-Fi LED will flash.
To verify the access point is disabled watch the Wi-Fi LED for about 15 seconds. It will be solid then flash twice then solid again.
Enable the Access Point #
Press and hold the top button until you hear 3 beeps, each beep will be about 3 seconds apart. The valve controller will quickly beep and the Wi-Fi LED will flash.
To verify the access point is enabled watch the Wi-Fi LED for about 15 seconds. It will remain solid.
