Filter

1/2″ Drip-Lock

MSRP: $1.62 – $5.05 USD

1/2″ Drip-Lock fittings for 1/2″ tubing

SKU: DL-005 Category: Tags: ,
Ditch the barbs, go drip-lock! Compatible with tubing from 16-18 mm, and so much easier to install.  Drip-lock is the latest product innovation for micro-irrigation.  With an oversized seal and stainless steel teeth, virtually all brands of half inch lines are held tight with no leaks.
The patented design of the Drip-Lock fittings requires only a cutter and is compatible with all 1/2″ drip tubing. All the Drip-Lock fittings can rotate 360 degrees on the tubing and are fully releasable with the built-in release collars.  These tough fittings are molded from UV-resistant ABS with stainless steel teeth that won’t break when stepped on or pull out when tugged on.

FEATURES AND BENEFITS

  • All ½” fittings are releasable and reusable with the Drip-Lock® release collar
  • Patented design requires no glue or tools for installation
  • Low insertion force makes installation quick and easy
  • ½” Drip-Lock® works with tubing from .630 to .710 inches (16 to 18 mm)
  • Drip-Lock® technology ensures lower friction loss for better water efficiency
  • Built tough fittings made from UV-resistant ABS, stainless steel and EPDM seals

Weight N/A
Dimensions N/A
Burst pressure

100 PSI
Operating pressure

30 PSI
Operating Pressure Range

0 – 50 PSI
Compatible Pipe Material

LDPE, LLDPE, MDPE, Polyethylene (Poly)
Fitting Type

401 – Tee (SOC x SOC x SOC), 406 – 90° Elbow (SOC x SOC), 429 – Coupling (SOC x SOC), 435 – Female Adapter (SOC x FPT), 436 – Male Adapter (SOC x MPT), 444 – Street Tee (SPG x SOC x SOC), 447 – Cap (SOC), Female Garden Hose Adapter, Valve
Size

005 – 1/2", 072 – 1/2" x 1/4", 101 – 3/4 x 3/4 x 1/2, 130 – 1" x 1" x 1/2" or 1" x 1/2"
Temperature Rating

137° F
UV Rating

3 Year
Compatible Pipe Dimesnion

1/2″ pipe with an Outer Dimension of 16mm (about .630") to .710" (18 mm)

Documentation

Videos

Related products

DRIP FITTINGS

1/4″ Double Barb Fittings

MSRP: $0.13 – $0.77 USD