Installation Instructions: #

Install keyed identification plate. #

Install the keyed identification on the module with correct stations showing. Each plate is double sided, so if you don’t see the Station numbers you want turn the plates over.

Turn off the Controller! #

Before removing or adding modules the Controller must be turned off. This protects the electronics from electrical surges and power outages.

Install 8 Station module. #

Each module should click into place either to the Controller or to other modules.

Connect wires. #

Connect the modules to the irrigation system wiring.

Turn on Controller. #

As the Controller powers on it performs a check to see what modules have been added or removed and what stations may have changed.