Note: DO NOT use pipe dope on the threads. If necessary, use thread seal tape.

1. Flush sprinkler lines.
2. Thread the Rotor onto a Swing Joint and set the head flush with the finished turf height.

Set the spray distance after installation #

Set with water on under the system’s normal operating pressure. Note: Preinstalled nozzle (#2) adjusts from 25 ft. to 45 ft. depending on system water pressure.

1. Insert the hex (metal) end of the key into the distance adjustment slot.
2. Turn clockwise to decrease distance; counterclockwise to increase distance.

Caution: DO NOT turn the adjustment screw too far in either direction the screw may come free of threads.