Manual Valve Activation

After installing all pipes and fittings, turn the water supply on and check for leaks with the valves closed.

To manually open a Valve. #

Turn the Solenoid, lever, or screw counterclockwise to open the Valve manually. Then close the Solenoid, lever, or screw to shut the Valve off.

For most valves, a 1/4 turn of the Solenoid is all that is needed. DO NOT exceed more than 1/2 turn.

If the Valve does not turn off, turn off the water supply, disassemble the Valve and check for obstructions.

If static water pressure exceeds 80 psi (5.5 bars), you should use a pressure regulator. Excessive pressure will shorten the life of a Valve and can cause leakage.